Receiving and Making Calls
English
18
2 To respond, hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3 Press the PTT button to talk and release it to listen.
4 Press d to end the call.
5 You hear a short tone.
If Phone Call capability is not enabled in your radio, your radio
mutes the call.
Phone Call as an All Call
Procedure:
When you receive a Phone Call as an All Call:
1 The LED blinks green. Your radio unmutes and the incoming
call sounds through the radio’s speaker.
2 Press the PTT button to talk and release it to listen.
If Phone Call capability is not enabled in your radio, your radio
mutes the call.
When you receive a Phone Call as an All Call, you can respond
to the call or end the call, only if an All Call type is assigned to
the channel.
Making a Radio Call
After selecting your channel, you can select a subscriber alias
or ID, or group alias or ID by using:
• The Channel Selector Knob
• A programmed One Touch Access button
NOTE: Your radio must have the Privacy feature enabled on
the channel to send a privacy-enabled transmission.
Only target radios with the same Privacy Key OR the
same Key Value and Key ID as your radio are able to
unscramble the transmission.
See Privacy on page 33 for more information.
The One Touch Access feature allows you to make a
Group or Private Call to a predefined ID easily. This
feature can be assigned to a short or long
programmable button press.You can ONLY have one
ID assigned to a One Touch Access button. Your
radio can have multiple One Touch Access buttons
programmed.
To Next Page
Loading...