Making and Receiving Calls
English
26
During an All Call, you are not able to use any
programmed button functions until the call ends.
Receiving and Responding to a Selective Call
A Selective Call is a call from an individual radio to another
individual radio. It is a Private Call on an analog system.
Procedure:
When you receive a Selective Call:
1 The LED blinks green.
2 The Private Call icon appears in the top right corner. The
first text line shows the caller alias or Selective Call or
Alert with Call. Your radio unmutes and the incoming
call sounds through the radio's speaker.
3 To respond, hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
4 If the Channel Free Indication feature is enabled, you hear a
short alert tone the moment the transmitting radio releases
the PTT button, indicating the channel is free for you to
respond.
Press the PTT button to respond to the call.
5 The LED lights up solid green.
6 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
7 Release the PTT button to listen.
8 If there is no voice activity for a predetermined period of
time, the call ends.
9 You hear a short tone. The display shows Call Ended.
See Making a Selective Call on page 30 for details on making
a Selective Call.
Receiving and Responding to a Phone Call
Phone Call as a Private Call
Procedure:
When you receive a Phone Call as a Private Call:
1 The Phone Call icon appears in the top right corner. The
display shows the caller alias or Phone Call.
2 Press the PTT button to talk and release it to listen.
3 Press d to end the call.
The display shows Ending Phone Call.
4 If successful:
A tone sounds and the display shows Call Ended.
OR
If unsuccessful:
Your radio returns to the Phone Call screen. Repeat Step 3
or wait for the telephone user to end the call.
To Next Page
Loading...