The display shows a transitional mini notice,
confirming that you have been logged in
successfully.
If you have failed to log in, the display shows a
negative mini notice.
Creating and Sending a Job Ticket
Your radio is able to create Job Tickets, which is
based on a Job Ticket template and send out tasks
that need to be performed.
Note: A CPS programming software is required to
configure the Job Ticket template. Check with your
dealer or system administrator to determine how your
radio has been programmed.
1
to access the menu.
2
or to Job Tickets and press to
select.
3
or to Create Ticket and press to
select.
4 Depending on how your radio is configured, do
one of the following:
If Then
If your radio is
configured with
one Job Ticket
template,
1 Use the keypad to type the
required room number and
press to select.
2
or to Room Status
and press to select.
3
or to the required
option and press to
select.
If your radio is
configured with
more than one
Job Ticket
template,
or to the required
option and press to
select.
5
or to Send and press to select.
Advanced Features in Non-Connect Plus Mode
118
English
To Next Page
Loading...