A tone sounds and the display shows Site
Locked.
The radio then returns to the Home screen. The
LED turns off and the display shows the channel
alias.
Starting a Manual Site Search
Start a Manual Site Search by
Radio
Controls
Steps
Manual
Site Roam
button
Press the programmed Manual
Site Roam button to start the
manual site search.
Radio
menu
1
to access the menu.
2
or to Utilities and
press to select.
3
or to Radio Settings
and press to select.
Radio
Controls
Steps
4
or to Site Roaming and
press to select.
5
or to Active Search
and press to select.
A tone sounds, the display shows Finding Site,
and the LED blinks green.
If a new site is found, a tone sounds and the LED
turns off. The display shows Site <Alias>
Found.
If there is no available site within range, a tone
sounds and the LED turns off. The display shows
Out of Range.
If a new site is within range, but the radio is unable
to connect to it, a tone sounds and the LED turns
off. The display shows Channel Busy.
The radio returns to the Home screen.
Advanced Features in Non-Connect Plus Mode
124
English
To Next Page
Loading...