Radio
Controls
Steps
2
or to Contacts and press
to select. The entries are
alphabetically sorted.
3 Use one of the steps described
next to select the required
subscriber alias or ID
• select the required alias or ID
directly
•
or to the required
alias or ID and press
to select.
•
use the Manual Dial menu
•
or to Manual Dial
and press
to select.
Radio
Controls
Steps
•
or to Radio
Number and press to
select.
• The first line of the display
shows Radio Number: .
the second line of the
display shows a blinking
cursor. Use the keypad to
enter the subscriber alias
or ID and press
.
4
or to Radio Enable and
press
to select.
The display shows Radio Enable: <Subscriber
Alias or ID> and the LED lights up solid green.
2 Wait for acknowledgement.
If successful, the radio sounds a positive indicator
tone and the display shows positive mini notice.
Advanced Features in Non-Connect Plus Mode
127
English
To Next Page
Loading...