2
On your radio, press to access the menu.
3
or to Bluetooth and press to select.
4
or to Devices and press to select.
5 Do one of the following:
•
or to the required device and press
to select.
•
or to Find Devices to locate available
devices. or to the required device and
press to select.
6
or to Connect and press to select.
Display shows Connecting to <Device>. Your
Bluetooth-enabled device may require additional
steps to complete the pairing. Refer to respective
Bluetooth-enabled device’s user manual.
If successful, the radio display shows
<Device>
Connected. A tone sounds and appears besides
the connected device. The Bluetooth Connected icon
appears on the status bar.
If unsuccessful, the radio display shows Connecting
Failed.
Note: If pin code is required, use the same entry
method as Step 2 in Accessing the Radio from
Password on page 128.
Finding and Connecting from a Bluetooth Device
(Discoverable Mode)
Do not turn off your Bluetooth or your radio during the
finding and connecting operation as this may cancel
the operation.
1 Turn Bluetooth On.
See Turning Bluetooth On and Off on page 132.
2
to access the menu.
3
or to Bluetooth and press to select.
Advanced Features in Non-Connect Plus Mode
133
English
To Next Page
Loading...