1
to access the menu.
2
or to Utilities and press to select.
3
or to Radio Settings and press to
select.
4
or to Tones/Alerts and press to
select.
5
or to All Tones and press to select.
6
Press to enable/disable all tones and alerts.
The display shows beside Enabled.
The disappears from beside Enabled.
Setting the Tone Alert Volume Offset Level
You can adjust the Tone Alert Volume Offset level if
needed. This feature adjusts the volume of the tones/
alerts, allowing it to be higher or lower than the voice
volume.
1
to access the menu.
2
or to Utilities and press to select.
3
or to Radio Settings and press to
select.
4
or to Tones/Alerts and press to
select.
5
or to Vol. Offset and press to
select.
6
or to the required volume value.
The radio sounds a feedback tone with each
corresponding volume value.
7 Do one of the following:
Advanced Features in Non-Connect Plus Mode
144
English
To Next Page
Loading...