5 Do one of the following:
•
Press to enable Mic AGC-A. The display
shows beside Enabled.
•
Press to disable Mic AGC-A. The
disappears from beside Enabled.
Digital Mic AGC (Mic AGC-D)
This feature controls the your radio's microphone gain
automatically while transmitting on a digital system. It
suppresses loud audio or boosts soft audio to a
preset value in order to provide a consistent level of
audio.
1
to access the menu.
2
or to Utilities and press to select.
3
or to Radio Settings and press to
select.
You can also use
or to change the selected
option.
4
or to Mic AGC-D and press to select.
5 Do one of the following:
•
Press to enable Mic AGC-D. The display
shows beside Enabled.
•
Press to disable Mic AGC-D. The
disappears from beside Enabled.
Switching Audio Route between Internal Radio Speaker
and Wired Accessory
You can toggle audio routing between the internal
radio speaker and the speaker of wired accessory
provided that:
• The wired accessory with speaker is attached.
• The audio is not routed to an external Bluetooth-
enabled accessory.
Powering down the radio or detaching the accessory
resets the audio routing to the internal radio speaker.
Advanced Features in Non-Connect Plus Mode
154
English
To Next Page
Loading...