Radio
Control
Steps
Programmed
Radio Check
button
1 Press the programmed Radio
Check button.
2
or to the required
subscriber alias or ID and
press to select.
Menu
1
to access the menu.
2
or to Contacts and
press to select.
3
or to the required
subscriber alias or ID and
press to select.
4
or to Radio Check
and press to select.
The display shows the Target Alias, indicating the
request is in progress. The LED lights up solid
green.
2 Wait for acknowledgement.
If the target radio is active in the system, a tone
sounds and the display briefly shows Target
Radio Available.
If the target radio is not active in the system, a
tone sounds and the display briefly shows Target
Radio Not Available.
Radio returns to the subscriber alias or ID screen
when initiated via Menu.
Radio returns to the Home Screen if initiated via
the programmable button.
Remote Monitor
Use the Remote Monitor feature to turn on the
microphone of a target radio (subscriber alias or IDs
only). The green LED will blink once on the target
subscriber. You can use this feature to monitor,
remotely, any audible activity surrounding the target
radio.
Advanced Features in Connect Plus Mode
200
English
To Next Page
Loading...