Attaching the Antenna
Caution: If antenna needs to be replaced,
ensure that only MOTOTRBO antennas are
used. Neglecting this will damage your radio.
1 With the radio turned off, set the antenna in its
receptacle and turn clockwise.
2 To remove the antenna, turn the antenna
counterclockwise.
Attaching the Belt Clip
1 To attach the belt clip, align the grooves on the
clip with those on the battery and press downward
until you hear a click.
2 To remove the belt clip, press the belt clip tab
away from the battery using a key. Then slide the
clip upward and away from the radio.
Preparing Your Radio for Use
21
English
To Next Page
Loading...