Press to move one space to the left. Press or
the key to move one space to the right.
Press the key to delete any unwanted
characters. Long press to change text entry
method.
4
Press once message is composed.
5 If you are sending the message, select the
recipient by
•
or to the required alias and press
to select.
•
or to Manual Dial, and press to
select. The first line of the display shows
Number:. The second line of the display shows
a blinking cursor. Key in the subscriber alias or
ID and press
.
The display shows Sending Message, confirming
your message is being sent.
If the message is sent successfully, a tone sounds
and the display shows Message Sent.
If the message cannot be sent, a low tone sounds
and the display shows Message Send Failed.
If the text message fails to send, the radio returns
you to the Resend option screen (see Managing
Fail-to-Send Text Messages on page 231).
Sending a Quick Text Message
Your radio supports a maximum of 10 Quick Text
messages as programmed by your dealer.
While Quick Text messages are predefined, you can
edit each message before sending it.
If you are sending the message, select the
recipient by
•
or to the required alias and press
to select.
•
or to Manual Dial, and press to
select. The first line of the display shows
Number:. The second line of the display shows
Advanced Features in Connect Plus Mode
228
English
To Next Page
Loading...