Radio
Controls
Steps
•
or to the required
alias or ID and press
to select.
•
Use the Manual Dial menu
•
or to Manual
Dial and press to
select.
•
or to Radio
Number and press to
select.
• The first line of the display
shows Radio Number:.
the second line of the
display shows a blinking
cursor. Use the keypad to
enter the subscriber alias
or ID and press
.
Radio
Controls
Steps
4
or to Radio Disable
and press to select.
The display shows Radio Disable: <Target
Alias or ID> and the LED blinks green.
2 Wait for acknowledgement.
If successful, a positive indicator tone sounds and
the display shows Radio Disable Successful.
If not successful, a negative indicator tone sounds
and the display shows Radio Disable Failed.
Radio Enable
1 Access this feature by
Radio
Controls
Steps
Radio
Enable
button
1 Press the programmed Radio
Enable button.
Advanced Features in Connect Plus Mode
243
English
To Next Page
Loading...