Finding and Connecting to a Bluetooth Device
Do not turn off your Bluetooth-enabled device or
press during the finding and connecting
operation as this cancels the operation.
1 Turn on your Bluetooth-enabled device and place
it in pairing mode. Refer to respective Bluetooth-
enabled device’s user manual.
2
On your radio, press to access the menu.
3
or to Bluetooth and press to select.
4
or to Devices and press to select.
5 Do one of the following:
•
or to the required device and press
to select.
•
or to Find Devices to locate available
devices. or to the required device and
press to select.
6
or to Connect and press to select.
Display shows Connecting to <Device>. Your
Bluetooth-enabled device may require additional
steps to complete the pairing. Refer to respective
Bluetooth-enabled device’s user manual.
If successful, the radio display shows
<Device>Connected. A tone sounds and appears
besides the connected device. The Bluetooth
Connected icon appears on the status bar.
If unsuccessful, the radio display shows Connecting
Failed.
Note: If pin code is required, use the same entry
method as Step 2 in Accessing the Radio from
Password on page 245.
Advanced Features in Connect Plus Mode
249
English
To Next Page
Loading...