Adjusting the Display Brightness
You can adjust radio’s display brightness as needed.
Note: Display brightness cannot be adjusted when
“Auto Brightness” is enabled.
1
to access the menu.
2
or to Utilities and press to select.
3
or to Radio Settings and press to
select.
4
or to Display and press to select.
5
or to Brightness and press to
select.
The display shows a progress bar.
6
Decrease display brightness by pressing or
increase the display brightness by pressing .
Select from setting of 1 to 8. Press
to confirm
your entry.
Setting the Display Backlight Timer
You can set the the radio’s display backlight timer as
needed. The setting also affects the Menu Navigation
Buttons and keypad backlighting accordingly.
Press the programmed Backlight button to toggle the
backlight settings, or follow the procedure described
next to access this feature via the radio menu.
The display backlight and keypad backlighting are
automatically turned off if the LED indicator is
disabled (see Turning the LED Indicator On or Off on
page 149).
1
to access the menu.
2
or to Utilities and press to select.
3
or to Radio Settings and press to
select.
Advanced Features in Connect Plus Mode
258
English
To Next Page
Loading...