Radio
Control
Steps
•
or to Radio
Number and press to
select.
• If there was previously
dialed ID, the ID appears
along with a blinking
cursor. Else, the first line
of the display shows
Radio Number:; the
second line of the display
shows a blinking cursor.
Use the keypad to edit/
enter the ID, and press
to select.
4
or to Remote Mon. and
press to select.
The display shows transitional mini notice,
indicating the request is in progress. The LED
lights up solid green.
2 Wait for acknowledgement.
If successful, a positive indicator tone sounds and
the display shows positive mini notice. Your radio
starts playing audio from the monitored radio for a
programmed duration and display shows Rem.
Monitor. Once the timer expires, the radio sounds
an alert tone and the LED turns off.
If unsuccessful, the radio sounds a negative
indicator tone the display shows negative mini
notice.
Stopping Remote Monitor
Remote Monitor automatically stops after a
programmed duration or when there is any user
operation on the target radio. Follow the steps below
to manually stop Remote Monitor.
1 Press the programmed Transmit Interrupt
Remote Dekey button.
Advanced Features in Non-Connect Plus Mode
67
English
To Next Page
Loading...