Viewing an Entry in the Scan List by Alias Search
1
to access the menu.
2
or to Scan and press to select.
3
or to Scan List and press to select.
4 Key in the first character of the required alias.
A blinking cursor appears.
5 Use the keypad to type the required alias.
Press to move one space to the left. Press to
move one space to the right. Press the key
to delete any unwanted characters. Long press
to change text entry method.
The first line of the display shows the characters
you keyed in. The next lines of the display show
the shortlisted search results.
The alias search is case-insensitive. If there are
two or more entries with the same name, the radio
displays the entry that is listed first in the scan list.
Editing the Scan List
Adding a New Entry to the Scan List
1
to access the menu.
2
or to Scan and press to select.
3
or to Scan List and press to select.
4
or to Add Member and press to
select.
5 Select the required alias or ID by performing one
of the following actions:
Advanced Features in Non-Connect Plus Mode
69
English
To Next Page
Loading...