Advanced Features
English
76
Editing a Text Message
Select Edit to edit the message before sending it.
NOTE: If a subject line is present (for messages received from
an e-mail application), you cannot edit it.
Procedure:
1 ^ or v to Edit and press c to select.
2 A blinking cursor appears.
Use the keypad to edit your message.
Press < to move one space to the left.
Press
> or # to move one space to the right.
Press
* to delete any unwanted characters.
Long press # to change text entry method.
3 Press c once message is composed.
4 ^ or v to Send and press c to send the message.
OR
^ or v to Save and press c to save the message to the
Drafts folder.
OR
d to edit the message.
d again to delete the message or save it to the Drafts
folder.
5 ^ or v to the required alias or ID and press c to select.
OR
^ or v to Manual Dial and press c to select. The first
line of the display shows Radio Number:. The second line
of the display shows a blinking cursor.
Key in the subscriber ID and press c.
6 The display shows transitional mini notice, confirming your
message is being sent.
7 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
Managing Sent Text Messages
Once a message is sent to another radio, it is saved in Sent
Items. The most recent sent text message is always added to
the top of the Sent Items list.
The Sent Items folder is capable of storing a maximum of
thirty (30) last sent messages. When the folder is full, the next
sent text message automatically replaces the oldest text
message in the folder.
NOTE: Long press
d at any time to return to the Home
screen.
To Next Page
Loading...