Motorola MOTOTRBO DP4801 - Turning the LED Indicator On or Off

Advanced Features
English
89
Radio Enable
Procedure:
Use the programmed Radio Enable button.
1 Press the programmed Radio Enable button.
2 ^ or v to the required alias or ID and press c to select.
3 The display shows Radio Enable and the subscriber alias
or ID. The LED lights up solid green.
4 Wait for acknowledgment.
5 If successful, the radio sounds a positive indicator tone and
the display shows positive mini notice.
OR
If unsuccessful, the radio sounds a negative indicator tone
and the display shows negative mini notice.
OR
Procedure:
Use the menu.
1 c to access the menu.
2 ^ or v to Contacts and press c to select. The entries
are alphabetically sorted.
3 ^ or v to the required alias or ID and press c to select.
OR
^ or v to Manual Dial and press c to select.
^ or v to Radio Contact and press c to select.
The first line of the display shows Radio Number:. The
second line of the display shows a blinking cursor.
Key in the subscriber alias or ID and press c.
4 ^ or v to Radio Enable and press c to select.
5 The display shows Radio Enable and the subscriber alias
or ID. The LED lights up solid green.
6 Wait for acknowledgment.
7 If successful, the radio sounds a positive indicator tone and
the display shows positive mini notice.
OR
If unsuccessful, the radio sounds a negative indicator tone
and the display shows negative mini notice.
Do not press
d during the Radio Enable operation as you will
not get an acknowledgement message.
