Advanced Features
English
94
4 ^ or v to the required device and press c to select.
OR
^ or v to Find Devices to locate available devices.
^ or v to the required device and press c to select.
5 ^ or v to Connect and press c to select. Display shows
Connecting to <device>.
Your Bluetooth-enabled device may require additional steps
to complete the pairing. Refer to respective Bluetooth-
enabled device’s user manual.
6 If successful, the radio display shows <Device>
Connected. A tone sounds and 9 appears beside the
connected device. The Bluetooth Connected icon appears
on the status bar.
OR
If unsuccessful, the radio display shows Connecting
Failed.
Do not turn off your Bluetooth-enabled device or press d
during the finding and connecting operation as this cancels the
operation.
NOTE: If pin code is required, use the same entry method as
Step 2 in Accessing the Radio from Password on
page 90.
Finding and Connecting From a Bluetooth Device
(Discoverable Mode)
Procedure:
1 Turn Bluetooth on. See Turning Bluetooth On or Off on
page 93.
1 c to access the menu.
2 ^ or v to Bluetooth and press c to select.
3 ^ or v to Find Me and press c to select.
Your radio can now be found by other Bluetooth-enabled
devices for a programmed duration. This is called
Discoverable Mode.
4 Turn on your Bluetooth-enabled device and pair it with your
radio. Refer to respective Bluetooth-enabled device’s user
manual.
5 When your Bluetooth-enabled device attempts to pair with
your radio, your radio display shows the device name,
Accept and Reject.
To accept the pairing:
^ or v to Accept and press c to select.
The display shows Bluetooth Pairing. If successful, a
tone sounds and display shows Pairing Completed.
To reject the pairing:
^ or v to Reject and press c to select.
To Next Page
Loading...