Making and Receiving Calls
English
37
Making a Call with the Programmable Manual Dial
Button
Making a Private Call
Procedure:
1 Press the programmed Manual Dial button to enter into the
Manual Dial screen.
2 ^ or v to Radio Contact and press c to select.
3 The display shows Number:. Use the keypad to enter a
subscriber alias.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
5 Press the PTT button to make the call. The LED lights up
solid green. The Private Call icon appears in the top right
corner. The first text line shows the subscriber alias. The
second text line displays the call status.
6 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
7 Release the PTT button to listen. When the target radio
responds, the LED blinks green.
8 If the Channel Free Indication feature is enabled, you hear a
short alert tone the moment the target radio releases the
PTT button, indicating the channel is free for you to respond.
Press the PTT button to respond.
OR
If there is no voice activity for a predetermined period of
time, the call ends.
9 You hear a short tone. The display shows Call Ended.
Making a Phone Call
Procedure:
1 Press the programmed Manual Dial button to enter into the
Manual Dial screen.
2 ^ or v to Phone Contact and press c to select.
3 The display shows Number:. Use the keypad to enter a
subscriber alias.
If the access code was not preconfigured in the Contacts
list, the display shows Access Code:. Enter the access
code and press c to proceed.
4 The LED lights up solid green. The Phone Call icon appears
in the top right corner. The first text line shows the
subscriber alias. The second text line displays the call
status.
To Next Page
Loading...