Advanced Features
English
44
^ or v to Radio Number and press c to select.
If there was previously dialed ID, the ID appears along with
a blinking cursor. Use the keypad to edit the ID. Press
c to
select.
OR
^ or v to Manual Dial and press c to select.
^ or v to Radio Number and press c to select.
The first line of the display shows Radio Number:. The
second line of the display shows a blinking cursor. Key in
the subscriber alias or ID and press c to select.
4 ^ or v to Remote Mon. and press c to select.
5 The display shows transitional mini notice, indicating the
request is in progress. The LED lights up solid green.
6 Wait for acknowledgment.
7 If successful, a positive indicator tone sounds and the
display shows positive mini notice. Your radio starts playing
audio from the monitored radio for a programmed duration
and display shows Rem. Monitor.
Once the timer expires, the radio sounds an alert tone and
the LED turns off.
OR
If unsuccessful, the radio sounds a negative indicator tone
the display shows negative mini notice.
Stopping Remote Monitor
Remote Monitor automatically stops after a programmed
duration or when there is any user operation on the target radio.
Procedure:
1 Press the programmed Transmit Interrupt Remote Dekey
button.
2 The display shows transitional mini notice, indicating the
request is in progress. The LED lights up solid green.
3 Wait for acknowledgment.
4 If successful, a positive indicator tone sounds and the
display shows positive mini notice.
OR
If unsuccessful, a negative indicator tone sounds and the
display shows negative mini notice.
To Next Page
Loading...