Advanced Features
English
55
During channel access, press
d
to dismiss the call attempt
and a negative indicator tone sounds. Your radio returns to the
Call Phone screen.
During the call, when you press One Touch Access button with
the deaccess code preconfigured or enter the deaccess code
as the input for extra digits, your radio attempts to end the call.
During channel access and access/deaccess code or extra
digits transmission, your radio responds to On/Off/Volume
Control Knob and Channel Selector Knob only. A tone sounds
for every invalid input.
The access or deaccess code cannot be more than 10
characters.
Making a Call by Alias Search
You can also use alias or alphanumeric search to retrieve the
required subscriber alias.
This feature is only applicable while in Contacts.
Procedure:
1 c to access the menu.
2 ^ or v to Contacts and press c to select. The entries
are alphabetically sorted.
3 Key in the first character of the required alias.
4 A blinking cursor appears.
Use the keypad to type the required alias.
Press
< to move one space to the left.
Press
> to move one space to the right.
Press
* to delete any unwanted characters.
Long press # to change text entry method.
5 The first line of the display shows the characters you keyed
in. The next lines of the display show the shortlisted search
results.
The alias search is case-insensitive. If there are two or more
aliases with the same name, the radio displays the alias that
is listed first in the Contacts list.
6 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
7 Press the PTT button to make the call. The LED lights up
solid green. The display shows the destination alias.
8 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
9 Release the PTT button to listen. When the target radio
responds, the LED blinks green.
To Next Page
Loading...