Advanced Features
English
72
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
If the text message fails to send, the radio returns you to the
Resend
option screen (see Managing Fail-to-Send Text
Messages on page 74).
Sending a Quick Text Message
Your radio supports a maximum of 50 Quick Text messages as
programmed by your dealer.
While Quick Text messages are predefined, you can edit each
message before sending it.
Procedure:
Press the programmed Text Message button and proceed to
Step 3.
OR
Follow the procedure below.
1 c to access the menu.
2 ^ or v to Messages and press c to select.
3 ^ or v to Quick Text and press c to select.
4 ^ or v to the required Quick Text and press c to select.
5 A blinking cursor appears.
Use the keypad to edit the message, if required.
Press
< to move one space to the left.
Press
> or # to move one space to the right.
Press
* to delete any unwanted characters.
Long press # to change text entry method.
6 Press c once message is composed.
7 ^ or v to the required alias or ID and press c to select.
OR
^ or v to Manual Dial and press c to select. The first
line of the display shows Radio Number:. The second line
of the display shows a blinking cursor.
Key in the subscriber alias or ID and press
c.
OR
d to edit the message.
d again to discard the message or save it to the Drafts
folder.
8 The display shows transitional mini notice, confirming your
message is being sent.
9 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
If the text message fails to send, the radio returns you to the
Resend
option screen (see Managing Fail-to-Send Text
Messages on page 74).
To Next Page
Loading...