Motorola MOTOTRBO DP4801 - Utilities; Turning the Radio Tones;Alerts On or Off

Advanced Features
English
82
Analog Message Encode
Your radio is able to send preprogrammed messages from the
Message list to a radio alias or to the dispatcher.
Sending MDC Message Encode to Dispatcher
Procedure:
1 ^ or v to Message and press c to select.
2 ^ or v to Quick Text and press c to select.
3 ^ or v to the required message. Press c to send.
4 The display shows transitional mini notice, confirming your
message is being sent.
5 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
Sending 5-Tone Message Encode to Contact
Procedure:
1 ^ or v to Message and press c to select.
2 ^ or v to Quick Text and press c to select.
3 ^ or v to the required message. Press c to select.
4 ^ or v to the required contact. Press c to select.
5 The display shows transitional mini notice, confirming your
message is being sent.
6 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.

