more information on the programmed duration of the
Emergency button.
Assignable Radio Functions
Actions – A programmable button to access a CPS
programmable action list.
Emergency On/Off – Depending on the
programming, initiates or cancels an emergency.
Manual Site Roam – Starts the manual site search.
Mic AGC On/Off – Toggles the internal microphone
automatic gain control (AGC) on or off.
Monitor – Monitors a selected channel for activity.
Nuisance Channel Delete – Temporarily removes an
unwanted channel, except for the Selected Channel,
from the scan list. The Selected Channel refers to the
user’s selected zone/channel combination from which
scan is initiated.
One Touch Access – Directly initiates a predefined
channel, a Private or Group Call, or a Call Alert.
Permanent Monitor – Monitors a selected channel
for all radio traffic until function is disabled.
Privacy – Toggles privacy on or off.
Repeater/Talkaround – Toggles between using a
repeater and communicating directly with another
radio.
Scan – Toggles scan on or off.
Site Lock On/Off – When toggled on, the radio
searches the current site only. When toggled off, the
radio searches other sites in addition to the current
site.
Voice Announcement On/Off – Toggles voice
announcement on or off.
Voice Operating Transmission (VOX) – Toggles
VOX on or off.
Zone Toggle – Allows radio user to toggle between
Zone 1 and Zone 2.
Assignable Settings or Utility Functions
All Tones/Alerts – Toggles all tones and alerts on or
off.
Power Level – Toggles transmit power level between
high and low.
Squelch – Toggles squelch level between tight
and normal.
To Next Page
Loading...