Motorola MOTOTRBO SL SERIES SL300 - Accessing the Programmed Action List; Push-To-Talk (PTT) Button

Accessing the Programmed Action List
You can access the CPS programmable action list by
using the programmed Actions button.
1 Press the programmed Actions button.
The display shows the first item in the action list, a
tone sounds, and the radio plays the item
announcement voice message.
2 Press the programmed Actions button again to
navigate to the next item in the action list.
The display shows the next item in the action list,
a tone sounds, and the radio plays the item
announcement voice message.
3 Press the Volume Button up or down to toggle on
or off, or change the status of the item.
The display shows the item status, a tone sounds,
and the radio plays the item announcement voice
message.
Push-To-Talk (PTT) Button
The PTT button on the side of the radio ( ) serves
two basic purposes:
A
• While a call is in progress, the PTT button allows
the radio to transmit to other radios in the call.
Press and hold down PTT button to talk. Release
the PTT button to listen.
The microphone is activated when the PTT button
is pressed.
• While a call is not in progress, the PTT button is
used to make a new call (see Making a Radio Call
on page 29).
Identifying Radio Controls
20
English