•
or to Quick Reply and press to
select.
A blinking cursor appears.
6 Use your keypad to write/edit your message.
7
Press
once message is composed.
The display shows transitional mini notice,
confirming your message is being sent.
If the message is sent successfully, a tone sounds
and the display shows positive mini notice.
If the message cannot be sent, a low tone sounds
and the display shows negative mini notice.
If the message cannot be sent, the radio returns
you to the Resend option screen (see Managing
Fail-to-Send Text Messages on page 100).
Deleting a Text Message from the Inbox
1 Access the Text Message feature by performing
one of the following actions:
Radio Controls Steps
Programmed
Text Message
button
Press the programmed Text
Message button.
Menu
1
to access the menu.
2
or to Messages
and press to select.
2
or to Inbox and press to select.
3
or to the required message and press
to select.
A subject line may be shown if the message is
from an e-mail application.
4
Press
once more to access the sub-menu.
5
or to Delete and press to select.
6
or to Yes and press to select.
Advanced Features in Non-Connect Plus Mode
108
English
To Next Page
Loading...