If a new site is within range, but the radio is unable
to connect to it, a tone sounds and the LED turns
off. The display shows Channel Busy.
The radio returns to the Home screen.
Security
You can enable or disable any radio in the system.
For example, you might want to disable a stolen
radio, to prevent the thief from using it, and enable
that radio, when it is recovered.
Note: Performing Radio Disable and Enable is limited
to radios with these functions enabled. Check with
your dealer or system administrator for more
information.
Radio Disable
1 Access this feature by
Radio
Controls
Steps
Radio
Disable
button
1 Press the programmed Radio
Disable button.
Radio
Controls
Steps
2
or to the required alias or
ID and press to select.
Radio
menu
1
to access the menu.
2
or to Contacts and press
to select. The entries are
alphabetically sorted.
3 Use one of the steps described
next to select the required
subscriber alias or ID:
• Select the required alias or ID
directly.
•
or to the required
alias or ID and press
to
select.
•
Use the Manual Dial menu.
Advanced Features in Non-Connect Plus Mode
118
English
To Next Page
Loading...