Radio
Controls
Steps
•
or to Manual Dial
and press to select.
•
or to Radio
Number and press to
select.
• The first line of the display
shows Radio Number: .
the second line of the
display shows a blinking
cursor. Use the keypad to
enter the subscriber alias
or ID and press
.
4
or to Radio Disable
and press to select.
The display shows Radio Enable: <Subscriber
Alias or ID> and the LED lights up solid green.
2 Wait for acknowledgement.
If successful, the radio sounds a positive indicator
tone and the display shows positive mini notice.
If not successful, the radio sounds a negative
indicator tone and the display shows negative mini
notice.
Do not press during the Radio Disable
operation as you will not get an acknowledgement
message.
Radio Enable
1 Access this feature by
Radio
Controls
Steps
Radio
Enable
button
1 Press the programmed Radio
Enable button.
2
or to the required alias or
ID and press to select.
Radio
menu
1
to access the menu.
Advanced Features in Non-Connect Plus Mode
119
English
To Next Page
Loading...