Radio
Control
Steps
displays the zone that is listed first in
the zone list.
3
Press to select.
The display shows <Zone> Selected
momentarily and returns to the selected zone
screen.
Selecting a Channel
Transmissions are sent and received on a channel.
Depending on your radio’s configuration, each
channel may have been programmed differently to
support different groups of users or supplied with
different features. After selecting the relevant Zone,
select the relevant channel you require to transmit or
receive on.
On the navigation disc, press
to access the
Channel List (while on the Home Screen). The
active channel is displayed and indicated by a .
Receiving and Responding to a Radio Call
Once the channel, subscriber ID, or group ID is
displayed, you can proceed to receive and respond to
calls.
The LED lights up solid green while the radio is
transmitting and blinks green when the radio is
receiving.
Note: The LED lights up solid green while the radio is
transmitting and blinks greenrapidly when the radio is
receiving a privacy-enabled call.
To unscramble a privacy-enabled call, your radio
must have the same Privacy Key, OR the same Key
Value and Key ID (programmed by your dealer), as
the transmitting radio (the radio you are receiving the
call from).
See Privacy on page 113 for more information.
Making and Receiving Calls in Non-Connect Plus Mode
43
English
To Next Page
Loading...