Advanced Features
English
37
Press < to move one space to the left.
Press
> to move one space to the right.
Press the *DEL key to delete any unwanted characters.
6 The first line of the display shows the characters you keyed
in. The next lines of the display shows the short listed
search results.
The alias search is case-insensitive. If there are two or more
entries with the same name, the radio displays the entry that is
listed first in the scan list.
Editing the Scan List
Adding a New Entry to the Scan List
Procedure:
1 c to access the menu.
2 ^ or v to Scan and press c to select.
3 ^ or v to View/Edit List and press c to select.
4 ^ or v to Add Member and press c to select.
5 ^ or v to the required alias or ID and proceed to
Step 8.
OR
Key in the first character of the required alias.
6 A blinking cursor appears.
Use the keypad to type the required alias.
Press
< to move one space to the left.
Press
> to move one space to the right.
Press the *DEL key to delete any unwanted characters.
7 The first line of the display shows the characters you keyed
in. The next lines of the display shows the short listed
search results.
The alias search is case-insensitive. If there are two or more
aliases with the same name, the radio displays the alias that
is listed first in the list.
8 Press c to select.
9 ^ or v to the required priority level and press c to select.
10 The display shows mini notice, followed immediately by
Add Another?.
11 ^ or v to Yes and press c to select, to add another entry,
and repeat Steps 5 to 9.
OR
^ or v to No and press c to select to save the current list.
Deleting an Entry from the Scan List
Procedure:
1 c to access the menu.
NAG-LACR.book Page 37 Tuesday, January 10, 2012 10:33 AM
To Next Page
Loading...