Advanced Features
English
81
Disconnecting from a Bluetooth Device
Procedure:
1 On your radio, press c to access the menu.
2 ^ or v to Bluetooth and press c to select.
3 ^ or v to Devices and press c to select.
4 ^ or v to the required device and press c to select.
5 ^ or v to Disconnect and press c to select. Display
shows Disconnecting from <device>.
Your Bluetooth-enabled device may require additional steps
to disconnect. Refer to respective Bluetooth-enabled
device’s user manual.
6 The radio display shows <Device> Disconnected. A
positive indicator tone sounds and 9 disappears beside the
connected device. The Bluetooth Connected icon
disappears on the status bar.
Switching Audio Route
You can toggle audio routing between internal radio speaker
and external Bluetooth-enabled accessory.
Procedure:
1 Press the programmed Bluetooth Audio Switch button.
2 A tone sounds and display shows Route Audio to Radio.
OR
A tone sounds and display shows
Route Audio to Bluetooth.
Viewing Device Details
Procedure:
1 c to access the menu.
2 ^ or v to Bluetooth and press c to select.
3 ^ or v to Devices and press c to select.
4 ^ or v to the required device and press c to select.
5 ^ or v to View Details and press c to select.
NAG-LACR.book Page 81 Tuesday, January 10, 2012 10:33 AM
To Next Page
Loading...