Receiving and Making Calls
English
13
Receiving and Responding to a Radio Call
Once the channel, subscriber ID, or group ID is set, you can
proceed to receive and respond to calls.
The LED lights up solid green while the radio is transmitting and
blinks when the radio is receiving.
The LED lights up solid green while the radio is transmitting.
Receiving and Responding to a Group Call
To receive a call from a group of users, your radio must be
configured as part of that group.
1 The LED blinks green. Your radio unmutes and the
incoming call sounds through the radio's speaker.
2 To respond, hold the radio vertically 1 to 2 inches
(2.5 to 5.0 cm) from your mouth.
3 If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is free for
you to respond.
Press the PTT button to respond to the call.
4 The LED lights up solid green.
5 Wait for the Talk Permit Tone to finish (if enabled) and
speak clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
6 Release the PTT button to listen.
7 If there is no voice activity for a predetermined period of
time, the call ends.
See Making a Group Call on page 15 for details on making a
Group Call.
Receiving and Responding to a Private Call
A Private Call is a call from an individual radio to another
individual radio.
Procedure:
LED Indicator
NDP_APAC.book Page 13 Thursday, April 4, 2013 2:28 PM
To Next Page
Loading...