Identifying Radio Controls
English
12
Switching Between Conventional Analog and
Digital Mode
Each channel in your radio
can be configured as a
conventional analog or
conventional digital channel.
Use the Channel Selector
Knob to switch between an
analog or a digital channel.
When switching from digital
to analog mode, certain
features are unavailable.
Your radio also has features available in both analog and digital
mode. However, the minor differences in the way each feature
works does NOT affect the performance of your radio.
Your radio also switches between digital and analog modes
during a dual mode scan (see Scan on page 27).
Channel Selector Knob
NDP_APAC.book Page 12 Wednesday, July 18, 2012 4:37 PM
To Next Page
Loading...