Identifying Status Indicators
English
13
Identifying Status Indicators
Your radio indicates its operational status through the following:
LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 13
Audio Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14
Indicator Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14
LED Indicator
The LED indicator shows the
operational status of your radio.
Blinking red – Radio is
transmitting at low battery
condition, receiving an
emergency transmission or has
failed the self-test upon
powering up, or has moved out
of range if radio is configured
with Auto-Range Transponder
System.
Solid yellow – Radio is
monitoring a conventional
channel. Also indicates fair
battery charge when Battery Strength button is pressed.
Blinking yellow – Radio is scanning for activity or receiving a
Call Alert.
Rapidly blinking yellow – Radio is actively searching for a new
site.
Double blinking yellow – Auto Roaming is enabled, radio is
actively searching for a new site. Also indicates radio has yet to
respond to a group call alert, or radio is locked.
Solid green – Radio is powering up, or transmitting. Also
indicates full charge of the battery when Battery Strength button
is pressed.
Blinking green – Radio is receiving a non-privacy-enabled call
or data, detecting activity or retrieving Over-the-Air
Programming transmissions over the air.
Double blinking green – Radio is receiving a privacy-enabled
call or data.
Note: While in conventional mode, when the LED blinks
green, it indicates the radio detects activity over the air.
Due to the nature of the digital protocol, this activity
may or may not affect the radio's programmed
channel.
LED
Indicator
NDP_APAC.book Page 13 Wednesday, July 18, 2012 4:37 PM
To Next Page
Loading...