38
Base settings
9.7 To reset the phone
You can restore the phone to its default (original) settings.
Resetting the phone will not aect the phonebook or Calls Lists, and all
handsets registered to the base will be retained. Only the handset and base
settings will be reset.
1. Press
Menu
, scroll D to
Settings
and press
Select
.
2. Scroll
D to
Set Base
and press
Select
.
3. Scroll
D to
Master Reset
and press
Select
.
4. Select
Yes
to confirm or
No
to cancel.
5. Enter the System PIN (Default setting = 0000) then press
OK
. The display
will show Reset complete and the unit will restart automatically.
9.8 Area code
The area code must be 3 digits long.
1. Press
Menu
, scroll D to
Settings
and press
Select
.
2. Scroll
D to
Set Base
and press
Select
.
3. Scroll
D to
Area Code
and press
Select
.
4. Using the keypad enter the area code and press
Save
to confirm.
9.9 Default settings
Handset Name HANDSET
Key tone On
Auto talk On
Ringer melody (EXT) Melody 3
Ringer melody (INT) Melody 1
Ringer volume 3
Earpiece volume 1
Phonebook Unchanged
Call list Unchanged
Redial list Unchanged
Master PIN 0000
Keypad lock O
Time format 12 hours
Alarm O
Answering machine On
Answer mode Answer & record
Outgoing message Pre-defined
Ring delay 4
Remote access On
To Next Page
Loading...
