48
Help
Noise interference on your radio or television
• Your base or charger cradle may be too close. Move it as far away as
possible.
Answering machine does not record messages
• Switch the answering machine on.
• The memory may be full. If so, you will need to delete some messages.
• Answer mode may have been set to Answer Only. Change the mode to
ANSWER & REC.
Cannot access messages remotely
• Remote access may be switched o.
• Check that you are using the correct PIN code. If wrong PIN is entered, a
beep is played. You can enter the PIN once again.
Cannot record outgoing message
• Answering machine stops recording
• The memory may be full. If so, you will need to delete some messages.
• The maximum message length is 3 minutes.
To Next Page
Loading...
Need help?
General
