6 Pair & connect
Pair & connect
connect and go
Note: The voice prompts are only in English.
Pair & connect with your phone
1 Turn off any Bluetooth® devices previously paired
with your headset.
2 Turn on the Bluetooth feature on your phone.
3 Put the headset on your ear (see “Wear it” on
page 4).
4 Turn on your headset (see “Turn it on & off” on
page 4).
The status light becomes steadily lit in blue and you
hear “ready to pair”.
5 Follow the voice prompts to connect your phone to
your headset.
Note: When prompted for the passkey, enter 0000.
When your headset successfully pairs with your
phone, you hear “pairing complete”.
For daily use, make sure your headset is turned on,
and your phone’s Bluetooth feature is on. Your headset
and phone will connect automatically.
To Next Page
Loading...
