Motorola One 5G Ace User Manual

Connect with Wi-Fi Direct
If you have a device, like a printer or TV, that supports Wi-Fi Direct, you can connect your phone without a
wireless router or cable.
When you turn on your phone’s Wi-Fi, Wi-Fi Direct is automatically enabled.
To connect to a Wi-Fi Direct device:
1. On the device you want to connect, set up Wi-Fi Direct. For instructions, see that product's user guide.
2. On your phone, go to Settings > Network & internet > Wi‑Fi > Wi-Fi preferences.
3. Touch Advanced > Wi-Fi Direct.
You'll see a list of Wi-Fi Direct devices that are within range and compatible.
4. Tap the device’s name to connect.
Settings : Network and internet 153

Motorola One 5G Ace Specifications

General

Display Size	6.7 inches
Display Type	IPS LCD
Resolution	1080 x 2400 pixels
Processor	Qualcomm Snapdragon 750G 5G
Rear Camera	48 MP (wide) + 8 MP (ultrawide) + 2 MP (macro)
Front Camera	16 MP
Battery Capacity	5000 mAh
Operating System	Android 10, upgradable to Android 11
Dimensions	166.1 x 76.1 x 9.9 mm
Weight	212 g
5G Support	Yes
Headphone Jack	Yes
RAM	4GB
Storage	64GB
Fingerprint Sensor	Side-mounted