3
Note: Once the accessory is connected, the radio microphone
and speaker are disabled.
4. Place the accessory in the ear.
5. Adjust the volume on the radio to a comfortable listening
level.
6. Press the PTT button, and speak into microphone to confirm
that the two-way communication works (the radio-in-
transmission light (LED) will be illuminated).
7. To receive information, release the button.
8. Always turn your radio OFF before disconnecting the
accessory.
9. Remove the accessory connector as shown in Figure 2.
Figure 2: Remove the accessory connector
MN001983A01.book Page 3 Thursday, January 2, 2020 8:51 AM
To Next Page
Loading...
