43Wireless
Bluetooth™ handsfree devices
Turn Bluetooth power on or off
Tu rn o n : Touch Menu >
System settings
, then drag
the
Bluetooth
power switch to the right to turn
it on.
Tu rn o f f : Touch Menu >
System settings
, then drag
the
Bluetooth
power switch to the left to turn
it off.
Note: To extend battery life, turn off Bluetooth power
when not in use.
Connect new Bluetooth devices
Note: This feature requires an optional accessory.
To connect with a new Bluetooth headset or other
device, you need to pair with it. You only need to do this
once for each device—to connect again, just turn on the
device.
1 Make sure the Bluetooth device you are pairing with
is in discoverable mode.
Note: Refer to the guide that came with the
Bluetooth device for details.
2 Touch Menu >
System settings
>
Bluetooth
.
3 Drag the
Bluetooth
power switch to the right to
turn on and scan. If Bluetooth power is already on,
touch
SEARCH FOR DEVICES
.
ON
OFF
4 Touch a device to connect.
5 If necessary, touch
OK
, or enter the device passkey
(like
0000
) to connect to the device. When the device
is connected, the Bluetooth connected indicator
appears in the status bar.
Note: Using a mobile device or accessory while driving
may cause distraction and may be illegal. Always obey
the laws and drive safely.
Reconnect devices
To automatically reconnect your phone with a paired
device, simply turn on the device.
To manually reconnect your phone with a paired device,
touch the device name in the
AVAILABLE DEVICES
list.
Disconnect devices
To automatically disconnect your phone from a paired
device, simply turn off the device.
To manually disconnect your phone from a paired device,
touch the device name in the devices list, then
touch
OK
.
Change device name
Touch Menu >
System settings
>
Bluetooth
, turn
Bluetooth power on, then touch Menu >
Rename
phone
. Enter a name and touch
OK
.
To Next Page
Loading...
