FREQUENCY AND CODE
English
64
MAKING XTN COMPATIBLE WITH RDX RADIOS - QUICK INSTRUCTIONS
The following instructions are a quick and easy way to make your XTN (XV1100, XV2100 and
XV2600 models) compatible with RDX Series™ default frequencies:
1. Make sure your XTN is programmed to the factory default frequencies (Turn your radio ON while holding the
MENU and PTT buttons simultaneously for three seconds).
2. Program Channel 1 with Frequency # 20 (154.4900 Mhz) and Channel 2 (for XV2600 model only) with
Frequency # 21 (154.5150 Mhz).
XTN VHF Default Frequencies
Channel Frequency #
Frequency
(Mhz)
Code Bandwidth
1 **3 154.5700 67.0 Hz 25.0 kHz
2 **4 154.6000 67.0 Hz 25.0 kHz
3 1 151.6250 67.0 Hz 25.0 kHz
4 2 151.9550 67.0 Hz 25.0 kHz
5 10 151.5125 67.0 Hz 25.0 kHz
6 12 151.6850 67.0 Hz 25.0 kHz
• Due to FCC regulations, the highlighted frequencies are different from the XTN default
values. Make sure to choose a compatible frequency whenever you need to
interoperate with XTN series.
• (**) Former XTN frequencies # 3 (154.5700 MHz) and # 4 (154.6000 MHz) are
considered MURS frequencies and are not available in the RDX Series™.
To Next Page
Loading...
