GETTING STARTED
English
35
2. Frequency: The frequency your radio uses to
transmit/receive.
3. Interference Eliminator Code: These codes help
minimize interference by providing you with a
choice of code combinations.
4. Scramble Code: Codes that make your
transmissions sound garbled to anyone
listening who is not set to that specific code.
For details of how to set up frequencies and
CTCSS/DPL codes in your channels refer to
the ‘Programming Mode’ Section.
BRUS_display.book Page 35 Monday, January 16, 2012 5:28 PM
To Next Page
Loading...
