Motorola RT802 - Page 43

43
4. When Enter number displays,
use the dialing keys to enter a
number (up to 30 digits).
-OR-
Copy a number from the redial
list by pressing REDIAL. Then
press CID/
, / or REDIAL
u;r;-|;7Ѵ|oCm7|_;7;vbu;7
number. Press SELECT to copy
the number.
5. Press SELECT to move on to
the name.
6. When Enter name displays,
use the dialing keys to enter
a name (up to 15 characters).
77bঞom-Ѵh;ru;vv;vruo71;
other characters on that key.
$_;Cuv|1_-u-1|;uo=;;u
ou7bv1-rb|-Ѵb;7ĺ
7. Press SELECT to save. You
_;-u-1omCul-ঞom|om;-m7
then the screen returns to the
previous menu.
While entering names and
ml0;uvķo1-mĹ
• Press CID/
or / to move
|_;1uvou|o|_;Ѵ;[ouub]_|ĺ
• Press DELETE to erase a digit.
• Press and hold DELETE to
erase all digits.
• Press and hold PAUSE to enter
a dialing pause (a p appears).
• Press 0 to add a space (for
entering names only).
• Press
to change
|_;m;|Ѵ;;u|orr;uou
lower case.
!;b;|_;1-ѴѴ0Ѵo1hѴbv|
1. Press CALL BLOCK when the
handset is not in use.
-OR-
Press MENU when the handset
is not in use. Press CID/
or
/ to choose Call Block, and
then press SELECT.
2. Press CID/ or / to choose
Block list, and then press
SELECT.
3. Press SELECT to choose
Review.
4. When an entry displays, press
CID/
or / to browse. You
hear a double beep when you
reach the beginning or end of
the caller block list.
&vbm]|_;r_om;