Motorola S1202 - Base Unit Configuration Options; Recall Time Settings; Restoring Factory Default Settings; Eco Mode Operation and Settings

25Base settings
6.5 Recall mode
Depending on your country and network operator, your S12 has the recall time set as 600
ms (
TIMED BR, 2 ). It is unlikely that you need to change this setting unless advised to do so.
1. Press
m, scroll d to SETUP and press m.
2. Scroll
d to RECALL and press m.
3. Press
u or
d
to select TIMED BR, 1 (short flash time) or TIMED BR, 2 (long flash time)
and press
m
to conrm.
6.6 Restore default settings
You can restore your S12 to its default (original) settings.
All the handsets that are registered to the base will be retained.
IMPORTANT
Resetting your phone to its default settings will delete all entries in the Phonebook and
Calls list. All handset and base settings will also be reset.
1. Press
m, scroll d to SETUP and press m.
2. Scroll
d to DEFAULT and press m.
3. Enter the 4 digit PIN code (default = 0000) and press
m. The display shows CONFIRM ? .
4. Press
m to conrm or B to return to the previous menu. Your S12 will restart
automatically.
6.7 Emergency default
If you have lost your PIN code, you can still restore your S12 to its default settings.
1. Remove the batteries from the handset.
2. Press and hold
* while replacing the batteries. The display shows DEFAULT.
3. Press m to conrm. Your S12 will restart automatically.
6.8 Eco mode
Your S12 oers ECO mode function which reduces the transmitted power and energy
consumption when switched on.
To switch Eco mode on:
1. Press
m, scroll d to SETUP and press m.
2. Scroll
d to ECO MODE and press m.
3. Press
u or d to select ON or OFF and press m to conrm.