Motorola SD4590 - Erasing the Outgoing Message; Setting the Number of Rings before the Answering Machine Picks up

35
Erasing the Outgoing Message
Note: You cannot erase the default message.
1 Go to the
SETUP DEVICE menu.
2 Scroll to
OUTGOING MSG.
3 Press SELECT.
4 Scroll to
ERASE OGM
5 Press
SELECT.
6 Press YES to ERASE RECORDED OGM.
7 Press
EXIT to return to the OUTGOING MSG menu. Press
EXIT again to return to the standby screen.
Setting the Number of Rings Before the
Answering Machine Picks Up
1 Go to the SETUP DEVICE menu.
2 Scroll to
RING NUMBER.
3 Press
SELECT.
4 Scroll to select 3, 4, 5, 6 rings or TOLL SAVER.