Motorola Symbol CR0078-P Cradles - Inserting and Removing the Scanner; Inserting the Scanner in the Cradle; Removing the Scanner from the Cradle

6 Symbol CR0078-P Cradles
Inserting the Scanner in the Cradle
To insert the scanner in the cradle:
1. Insert the scanner by placing the bottom of the scanner, at a slight forward
angle, into the CR0078-P cradle.
2. Push the handle back and down until it clicks, engaging the contacts of the
scanner and cradle.
Removing the Scanner from the Cradle
To remove the scanner from the cradle:
1. Remove the scanner by pushing the scanner slightly forward and up out of the
CR0078-P cradle.
2
1
Click
2
1
Click