13Getting to know your phone
Battery is running low
Flashes when battery is almost fully discharged
1
For this feature to work, you must subscribe to Caller ID Service from your network
operator. A subscription fee may be payable.
2
This feature is dependent on your Network Service provider supporting the service. A
subscription fee may be payable.
Overview of the base
A
A Page
In standby mode, press to ring the handset(s)
.
Press and hold to enter registration mode when registering handsets
.
Navigating the menus
Your T3 has an easy to use menu system.
Each menu has a list of options, which you can see on the menu map on the following
page.
When the handset is switched on and in standby:
1. Press
M to open the main menu.
2. Then use
u or
d
buttons to scroll through the available options.
3. Press
M to select an option. To return to the previous menu level, press p . To
exit the menu and return to standby, press
n
.
NOTE
If no buttons are pressed for 30 seconds, the handset returns to standby automatically.
To Next Page
Loading...
Need help?
General
