English
English
Scan
Use Scan to monitor channels for transmissions, or to find someone in your group who has accidentally
changed channels.
• Press $ twice until the display shows h and a flashing Y or <
• Press % or & until Y displays to turn scanning on
• Press % or & until < displays to turn scanning off
• Press PTT to confirm
When the radio detects channel activity, it stops scanning and you can hear the transmission.
To respond, press PTT within 5 seconds.
Attaching the Belt Clip
Hook the belt clip into the
notch at the top of the radio
and slide down until it clicks
into place.
To remove, pull back the
release latch and slide the clip
up and away from the radio.
10 11
FURTHER INFORMATION
Talk Range
Your radio has been designed to maximize performance and improve transmission range in the field.
It is recommended that you do not use the radios closer than 1.5 meters apart, to avoid interference.
Talk range depends on the terrain. It will be affected by concrete structures, heavy foliage and by
operating radios indoors or in vehicles.
Optimal Range Medium Range Minimal Range
Outdoors Outdoors Outdoors
Flat, open areas Buildings or trees Dense foliage or
Also near mountains
residential buildings Also inside some buildings
Optimal range occurs in flat, open areas, with up to 5 kilometres of coverage.
Medium range occurs when buildings and trees are in the way. Minimal range
occurs when dense foliage and mountains obstruct the communication path.
To Next Page
Loading...
Need help?
General
