35Using your Answering Machine
10.5 Ring delay
Select the duration of rings before your answer machine picks up the call.
Choose from 3-8 Rings or Toll Saver.
• When set to Toll Saver, if you have new messages your phone answers after
3 Rings.
• If there are no new messages it will answer after 5 Rings. So you have the
option to hang up, saving the time and cost of a call.
• If the memory is full, it will automatically revert to Answer Only mode.
1. Press M, scroll d to
Answ. machine
and press M.
2. Scroll d to
Ring delay
and press M. The handset will display the current
setting.
3. Use i or d to select the number of rings required and press M to confirm.
10.6 Remote access
You can operate your answering machine from any DTMF phone by calling
your product and entering a 4 digit security PIN code.
1. Dial your telephone number. When you hear your outgoing message, press
#.
2. Enter your 4-digit PIN (default setting 0000) you will hear a confirmation
beep. Use the keypad to operate the answering machine.
Press 1 for previous the message Press 7 to turn On the answering
machine
Press 2 to play messages Press 8 to stop message playback
Press 3 to play the next message Press 9 to turn Off the answering
machine
Press 6 to delete the current message
To Next Page
Loading...
Need help?
General
